Skip to content
IFSS Forms
  • Maintenance Records
IFSS Forms

Access Control Maintenance Form (forminator)


TECHNICIAN'S DETAILS

CLIENT DETAILS


CONTROL PANEL


A. Checked and Tested the communication to all the field devices. *
B. Upgraded the controller Firmware. *
C. Checked for sound physical fixings of all equipment including loosening or corrosion of supports, Fixings & cables are labelled. *
D. Performed voltage test on power supply batteries and checked panel fuses. *

FIELD DEVICES

A. Checked all glands, seals and Terminations on all Readers, Keypads, Break glass Units, Contacts & Exit Buttons. *
B. Checked all cables and conduit are properly supported, undamaged and showing no signs of wear. *
C. Checked the operation of door contacts (where fitted) for correct indication of door forced & door held open alarms. *
D. Checked operation of egress buttons & emergency break glass releases. *
E. Checked the correct operation of the readers & Keypads with a valid and an invalid card/pin. *
F. Checked operation of locks and correct door closure, report any malfunction. *
G. Verified correct operation of doors in a fire condition, where appropriate. *

ACCESS CONTROL SOFTWARE

A. Check satisfactory operation of PC software and advise customer on the back-up of the database where applicable. *
B. Verify remote operation of locks from PC software. *
C. Check the Access Control system is fully operational. *
D. Carry out minor programming as requested by the client. *

FINAL REMARKS

No file chosen
Click here to upload your signature

For Client


No file chosen
Click here to upload your signature

© 2026 IFSS Group - All Rights Reserved

  • Maintenance Records
Search